DA220-004YRMK4
Reversible drill with MORSE taper - for drilling, reaming and counter-sinking operations in tight access areas.
When using this drill with the optional available grip-tube, this drill may also be used as a universal drill with equally benefical results. The drill is equipped with a feed-spindle that is also used for the removal of the drill bit. As an optional feature, we can offer the model DA 220 with a ratchet instead of the pilot-wheel. For extreme tight access areas, we offer reduced profile drill designs, without feed-spindle or pilot-wheel. Our drill is additionally equipped with a speed regulator, which helps to reduce the air consumption when idling.
Objednací číslo
3010701A
| Max. power output | 2200 W / 2.95 hp |
|---|---|
| Speed (no load) | 400 min-1 |
| Weight | 17 kg / 37.48 lbs |
| Drive | vane motor |
| Assortment | Additional Assortment |
| Start | twist valve |
| Rotation | right |
| Nominal speed | 200 min-1 |
| Air consumption (loaded) | 2 m3/min / 70.62 cfm |
| I.D. of air inlet hose | 19 mm / .75 in |
| Morse taper | 4 |
| Drilling into steel to | 55 mm / 2.17 in |
| Reaming up to | 50 mm / 1.97 in |
| Air connection | thread 3/4" female |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Quick release coupling |
|
804352 |
|---|