For Cutting

Air pliers for cutting - for the industrial use for example in series production, in the automotive industry, in machine building industry, in the appliance industry as well as in maintenance and assembly departments

Pliers are suited expecially for the use in mass production, where a person can suffer sustained, long-lasting and monotonous stress in performing tasks such as assembling clips or cutting wires with manual tools. Such working conditions may result in RSI (repetitive strain injury). By replacing manual tools with our pneumatic pliers the workers will be protected against negative effects of mass production workplace.

Product Catalogue

 

Pneumatic pliers for the use of:

  • Cutting Cu, Al, Ag plastic materials (PVC, PF) and steel max. 400 N/mm2 / 25 long tons/sq.in
  • Simultaneous cutting and wire-end flattening or
  • Simultaneous cutting and 90°angle forming of wire ends of electronic components
  • Pressing of cable joints
     

Advantages of our Pliers:

  • Easy handling

The favorable weight / dimension to power ration makes them very handy and easy to work. The plier inserts can be operated in any cutting position by turning the complete plier head against the plier body and lever. The jaws of the plier inserts are separately supported in the plier inserts are separately supported in the pliers head and therefore extremely easy to operate.

  • High power

Max. cutting force 11 850 N.

  • Long lifespan

The most modern technologies applied to thermal processing, guarantee the high lifespan and reliability of all our plier components.

Plier inserts for cutting are available in two designs:

  1. Standard execution for cutting. One insert side has an edge for cutting, the other insert side is designed as a counter-holder. This eliminates a possible crossing of the inserts and this extensive wear of the insert joint. When cutting soft, flowing materials, an overlapping of the inserts results in uneven cuts or nicks.
  2. Special execution for cutting plastic materials. Both insert sides are equipped with a cutting edge.

Air Pliers

query
  • Cutting force 560 N
  • Weight (without plier insert) 0,08 kg / .18 lbs
  • Diameter 27 mm / 1.06 in
  • Length (without plier insert) 128 mm / 5.04 in
  • Cutting force 830 N
  • Weight (without plier insert) 0,15 kg / .33 lbs
  • Diameter 35 mm / 1.38 in
  • Length (without plier insert) 149 mm / 5.87 in
  • Cutting force 1460 N
  • Weight (without plier insert) 0,5 kg / 1.10 lbs
  • Diameter 36 mm / 1.42 in
  • Length (without plier insert) 204 mm / 8.03 in
  • Cutting force 2180 N
  • Weight (without plier insert) 0,6 kg / 1.32 lbs
  • Diameter 36 mm / 1.42 in
  • Length (without plier insert) 251 mm / 9.88 in
  • Cutting force 3000 N
  • Weight (without plier insert) 0,65 kg / 1.43 lbs
  • Diameter 47 mm / 1.85 in
  • Length (without plier insert) 216 mm / 8.50 in
  • Cutting force 3800 N
  • Weight (without plier insert) 0,8 kg / 1.76 lbs
  • Diameter 47 mm / 1.85 in
  • Length (without plier insert) 270 mm / 10.63 in
  • Cutting force 6600 N
  • Weight (without plier insert) 1 kg / 2.20 lbs
  • Diameter 54 mm / 2.13 in
  • Length (without plier insert) 251 mm / 9.88 in
  • Cutting force 4000 N
  • Weight (without plier insert) 1,04 kg / 2.29 lbs
  • Diameter 60 mm / 2.36 in
  • Length (without plier insert) 262 mm / 10.31 in
  • Cutting force 8700 N
  • Weight (without plier insert) 1,15 kg / 2.54 lbs
  • Diameter 54 mm / 2.13 in
  • Length (without plier insert) 311 mm / 12.24 in
  • Cutting force 3400 N
  • Weight (without plier insert) 0,48 kg / 1.06 lbs
  • Diameter 50 mm / 1.97 in
  • Length (without plier insert) 173 mm / 6.81 in